After completely disabling Firewall (for both Private and Public networks) communication started to work. When starting I saw plenty of LAN traffic between PC and NVEM but no communication between Mach3 and EVEM and nothing worked. So far Mach3 has accepted the driver and responds to Emergency input and Digitize inputs from EVEM inputs which I'm able to test on my drawing board with a Dell laptop.
I'm exited to see if this thing will be good enough in the end to replace my two parallel ports and two BOBs which limited the speeds of my servos. My first Aliexpress purchase, not a very promising start there.įound the recommended EC500 driver and EVEM V2 manual from the manufacturers site. Shipping it back to China form Finland would cost 44€, so which ever choice I make it would be a bad deal if I can't find the driver and get the thing working. I made a dispute to Aliexpress and they gave me tree days to reply and decide whether I take a $20 refund or ship the whole thing back for full refund.
Is there a friendy person here who could post or have a download link to the latest NVEM Mach3 Ethernet driver and what ever other stuff there is on the CD? I have a commercial Mach3 so what I really need are the driver and manuals. I posted to the seller for the files but they do not reply.
The shipping cardboard box was damaged and there is a big scratch on the CD and my PC just won't read the disk at all. Just received NVEM version 2 for 3 to 6 axis bought from Aliexpress. > Downloaded here (Told by DigitalDream that plugins works because EC500 is a updated of NVEM) NVEM v2 is original, with "Lollete" stick. Configure the IP Address correctly and boom, it works. Was a little difficult to configure in Mach, but you have to "allow the program to get internet connection" it's a setting in Windows Firewall. Probing -> Just Impossible to probe with this board, it's even difficult to explain how the probe is erratic. When i set 15k RPM in Mach3, I get 14.1k RPM in the Spindle. Spindle -> Mine NVEM v2 cannot set the right speed in Spindle, I checked the VSO output, I was getting 10.37V in 24k RPM.
(Configured like the manual, just the positive limit trigger "X++ Y++ Z++ ") Homing / Limits -> The NVEM v2 controller can home two axis, the third axis get a "limit trigger" error.
0 kommentar(er)
